800-576-5919

 

 

 

 

Closer to the seaside, homes are continually “under assault” from sand, salt, water, and wind. These combinations corrode and pulverize everything in their path over time.

 

And that includes fences and jersey Gates !

 

A significant portion of my almost thirty years as a gate and fence contractor have been spent at the beach! I wish I could say I was largely surfing and partying, but I was really basically resolving gate fence issues.

 

Which fence and gate is ideal for a beach house?

 

This oceanfront gate is not corroded by water, salt, sand, and wind spray. This powder-coated aluminum gate replaced a previous steel gate that these pressures had demolished.

 

You need to complete this correctly! Choose a fence and gate that can withstand sand, salty air, water, and wind. These elements may slowly or swiftly deteriorate a fence and gate system.

 

Let’s examine the “Big Four” individually. I have no idea which of them is the greatest offender. Water is a concern for jersey Gates  and fences everywhere, not just in seaside towns.

 

 

 

From top left, clockwise: steel gate hinges move and damage the finish, enabling water to enter and rust to grow; hefty iron or wooden jersey Gates  need chain drives that rust; and steel gate hinges move and damage the finish. The motors on our aluminum jersey Gates  are more efficient and rust-proof. The bottom two images illustrate what occurs when water penetrates the paint on an iron gate. The water penetrates and permeates the whole gate, causing degradation and ultimate metal collapse.

 

Steel and wood may be finished using numerous materials. Steel may be zinc-dipped and then powder-coated. Still, all it takes is a scratch or abrasion to penetrate the coating and expose the underlying metal for problems to begin.

 

Also, there are other techniques to seal or polish wood, all of which must be regarded “temporary remedies.” (A wood fence near the seaside may need refinishing as often as twice a year.)

 

Wind is a significant issue with beach fencing.

Winds are a concern in a number of coastal regions. Our U.S. facility is located in Los Angeles. The renowned “Santa Ana winds” sweep across towns and cities throughout the region.

 

The wind presents two issues for beach community jersey Gates  and fence.

 

First, the wind scoops up sand and hurls it against the fence, causing the fence’s finish to deteriorate. This will be discussed in the next portion of this article.

 

Wind may cause damage to certain fence panels and jersey Gates  by “catching” them.

 

Windy places need extreme caution while erecting fences and jersey Gates . Some individuals choose to build privacy fence in order to create a windbreak. You may do so, but ensure that the fence is not a solid full-privacy fence but rather a partial-privacy fence with slats.

 

Inadequately positioned or fitted privacy jersey Gates  and fence panels may act as wind sails, capturing the wind and bringing the fence down. A tremendous blast of wind may catch a gate and cause damage by slamming it against a person.

 

The most secure fencing solution for very strong and unpredictable winds is picket panels and jersey Gates . Various trees and plants are also recommended by landscapers.

 

You may add stronger jersey Gates  and fences for seclusion. Ensure that you choose an experienced expert.

 

Sand deteriorates metal, wood, and coatings.

Have you ever lived in or visited a residence located many blocks from the beach? Do you recall cleaning up sand mounds?

 

I have often slept in motels and B&Bs a few blocks from the real ocean. It used to stun me how much sand would gather on the floor just by keeping the windows open all day. The ocean’s sand is composed of very thin and light particles that are also incredibly robust.

 

 

Wind, sun, salt, and moisture can have a negative impact on the outside of a property. The wood has been bleached and exhibits symptoms of degradation, despite the fact that the property maintains its original beauty.

 

You’ve surely observed that automobile owners living by the seaside have a shorter time to enjoy the sheen of a brand-new vehicle. According to painters, this is mostly due to the quantity of fine sand carried by wind across the car’s surface.

 

Almost certainly, you have heard of sandblasting. To remove the finish off materials, manufacturers blast them with air-pressurized sand, similar to the sand we see in the ocean. Professional finishers use sandblasting to clean and prepare metals for refinishing.

 

To some degree, if you live at the beach, everything exposed to the elements is being “sandblasted”! The sand carried by the wind progressively erodes the finish on everything metallic and the surface of anything made of wood. Once sand penetrates the coating of a traditional steel fence, water and wind may destroy it. When sand penetrates the finish of a wood sealant, it may also degrade the wood itself.

 

Salt Corrodes In physical and chemical terms

Due to its chemical and physical properties, salt may create issues for fences and jersey Gates .

 

In addition, the salt in the saltwater air in seaside areas is detrimental to steel and wood.

 

Regarding steel, water is the primary cause of rust. However, seaside life contributes salt to the process, which leads to chemical interactions that substantially accelerate corrosion.

 

Regarding wood, saltwater causes further issues.

 

“Saltwater may hasten the decomposition of wood. UV rays dry out wood over time, causing fissures through which salt and moisture may leak in. Mold and decay are unavoidable from this point on.”

 

Does saltwater have an effect on timber?

Published 7 February 2019 in Urbanline News

 

Solutions for Community Beach Fencing and jersey Gates 

How does this affect your fence project?

 

This implies that if you want a more hassle-free fence at the beach, you should choose more hassle-free materials.

 

Standard Fencing and Gate Materials

Metal and wood are common fencing materials that may be used to construct a fence. If so, you will need to be watchful for impending issues and proactive in their prevention. When you construct a fence from steel or wood, you will need to do more maintenance. Therefore, you will need to clean it more often. It also implies you will have to do tasks more often.

 

Or, you may choose for a material that needs less upkeep.

 

Aluminum is the best material for fences and jersey Gates  in beach communities.

Water has no negative effect on metal. Aluminum is the primary material for outdoor construction. Aluminum is the material of choice for a builder who must guard against corrosion.

 

Why does Aluminium exist?

When exposed to water, metal does not rust. Unfinished metal will develop a very thin corrosion coating that protects the aluminum underneath. For further protection, Mulholland (and practically all other leading manufacturers) powder-coats its aluminum products with an exceptionally durable and attractive finish.

 

A picket or rail fence made of aluminum performs well in severe winds. Aluminum fences and jersey Gates  that have been erected correctly are entirely capable of withstanding the power of intense winds. The thin pickets do not capture wind and form sails.

 

Aluminum is a superior alternative to steel. Steel corrodes in salty air. Even when powder-coated, a scratch that penetrates to the underlying steel might cause significant damage.

 

Stainless steel is another fantastic material option. The greatest disadvantage is that it is prohibitively pricey. Stainless steel is very heavy and costly to install.

 

We appreciate your interest in this topic. 

Water – This is a difficulty.

If your residence is in close proximity to the coast, the salt content of the ocean’s spray will be high. This salt is very corrosive to common fence and gate materials and finishes. Steel and wood are the most often used fencing materials. Steel will corrode after repeated exposure to seawater spray. Wood will absorb the water, salt, and organic material in the water, which will cause it to expand and compress, rot, and eventually disintegrate.